Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> Antiques
> Anvils
> Tile flooring underlayment, blanke, aqua shield
Tile flooring underlayment, blanke, aqua shield
Aqua Shield Full Roll is 323sqft.
Blanke Aqua Shield is a waterproofing membrane, used on tiled showers, that can be applied with thinset to most surfaces that are dry, flat, and structurally sound. Tile can be installed directly on the membrane without the cure time required for liquid applied products. Blanke Aqua Shield provides a vapor barrier that makes it ideal for steam showers. The high tensile strength of the Blanke Aqua Shield ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms.
Check substrate to ensure that it is dry, even, and sound. Apply a setting mortar suitable for the application to the wall or floor with a 4 mm notched trowel. Apply the mortar on an area approximately 3/8 wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with your trowel. Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4 fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner.
This is Aqua Shield Tile Shower Waterproofing Membrane 323 sq ft roll or 3.28' x 98.4 '
For More Information: Click Here
aqua shwield awua sheild installation aqua sheild water proofing
