Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> Antiques
> Cast Iron Machines
> Prototyping module 57 x 57MM w/ 246 pads
Prototyping module 57 x 57MM w/ 246 pads
Prototyping Module 57 x 57mm w/ 246 Pads
Sale is for 1pc. Breadboard matching proto board 57 x 57mm with plastic holder.
* PCB holder enables efficient top-side soldering &
* Frees hands for quicker circuit construction
* PCircuit fully tested on breadboard before soldering
* One step Circuit-Transfer, from breadboard to PCB
* Significantly speeds up project building time
* 4x PCB mounting screw 2mm
Direct Circuit Transfer Method
Using QB - 1 - Place Quick-Board on Top of Breadboard
Place Quick-Board PCB on top of breadboard module.
Using QB -2 - Insert Components through PCB
Start circuit construction and test.
Using QB - 3 - Solder Components
Using QB - 4 - Remove Soldered PCB
Remove the soldered PCb from the breadboard.
Pictogram - PCB Cuts Easily with Scissors
The QB-PCB is a new series of double-sided PCBs designed to enable easy and direct transfer of temporary circuit built on a solderless breadboard onto a PCB. In practical use, the PCB is placed on top of either breadboard module MBB-830 or MBB-1460. These PCBs have identical shapes and copper trace patterns to the tie-points on a standard breadboard; therefore acting transparently in breadboard circuit construction.
When a breadboard circuit has been built and fully tested, it is ready to be soldered onto the sandwiched PCB. The solder barrier sheet on the bottom side of PCB prevents solder from getting down onto the breadboard underdeneath. With circuit power turned off, progressively solder a portion of the circuits on the top side of the PCB. Retest circuit after each soldering session so that problems introduced in soldering can quickly be isolated. This is an efficient and confident way of transferring a working circuit built on a breadboard onto PCB. The finished PCB would then be removed for mounting to its matching holder or a project box permanently. It is optional to trim all the components leads on the bottom side of the PCB before mounting to its holder.
Quick-Board PCB come in four standard sizes and each has a matching plastic holder sold as a pair. These plastic holders have built-in interlocking mechanism so that additional PCB spaces can be expanded by simply adding holders and PCB as needed. The full line of LAB-EASY prototyping products are designed to make your project building easier, faster and more satisfying.
Pictogram - Gold or Solder Plated Pads
Pictogram - Meter Probe Points
Pictogram - Easy System Expansion
Circuit Building on Breadboard via PCB
Pictogram - Quick-Snap Standoff Kit
Top Side Soldering After Circuit Testing
