Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> Electrical Machinery
> Refrigeration
> Banner maxi-beam wiring base model #OLM5, part#27098
Banner maxi-beam wiring base model #OLM5, part#27098
Banner Maxi-Beam Wiring Base Model #OLM5, Part#27098
Omni-Bean sensors easily accept the addition of timing logic, when needed. Model OLM5 is programmable for ON-delay, OFF-delay, or ON/OFF-delay timing logic. Each delay function may be independently adjusted and separately programmed for either a long or short adjustment range. Programming of the logic function, the timing range, and the output state is done via a set of four switches located on the logic module.
The module features 15-turn clutched potentiometers for accurate timing adjustments. The logic module simply slides into the sensor head housing and inter-connects without wires. Timing adjustments are easily accessible at the top of the sensor head, and are protected by the sensor head's transparent, gasketed LEXAN cover.
* If both ranges of either delay function are selected (i.e., if both 1 second and 15 second switches are "on"), the delay time range becomes 16 seconds, maximum.
* With switches #1 and #2 "off" (no ON-delay programmed), ON-delay is adjustable from "negligible" up to 100 milliseconds, maximum.
* With switches #3 and #4 "off" (on OFF-delay programmed), OFF-delay is adjustable from "negligible" up to 100 milliseconds, maximum.
* Operating temp.: 0 to +50 C (+32 to +122 F) when used in Omni-Beam E-series sensors.
* Timing adjustments: Two 15 turn clutched potentiometers with brass elements, accessible from outside at top of sensor block, beneath gasketed cover.
* Timing repeatability: Plus or minus 2% of timing range (maxium). Assumes conditions of constant tempurature and power supply.
* Useful time range: Useful range is from maximum time down to 10% of maximum for all models. When timing potentiometer is set fully counterclockwise, time will be approximately 1% of maximum.
