Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> Electrical Machinery
> Refrigeration
> T962A infrared smd & bga ic automatic large reflow oven
T962A infrared smd & bga ic automatic large reflow oven
T962A INFRARED IC HEATER and REFLOW OVEN
This self-contained reflow station allows safe soldering techniques and the manipulation of SMD BAG and other small electronic parts mounted on a PCB assembly. The T962a may be used to automatically re-flow solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
The T962a is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles,
1. The T962A is a self-contained Micro-Processor controlled IC Heater and solder rework station.
2. Uses up to 1500 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large 300 320mm area.
3. Parameters of Eight (8) Soldering cycles are Pre-Defined
4. Soldering cycles are keypad selected and progress displayed on the T962a LCD.
6.The T962A design is ergonomic, practical and easily operated.
8. The T962A design is ergonomic, practical and easily operated.
9.The T962A is an economical rework solution from single runs to on-demand small batch production.
10. Light weight and a small footprint allows the T962a to be easily bench positioned transported or stored.
11.The T962A can solder most bosseyed or double-face PCB boards small parts, ie.: CHIP SOP PLCC QFP BGA etc; Can be used to the gum of the product solid, turning the circuit board hot aging, maintaining the PCB board and so on. Be satisfied to the needs of academe , smallorder run and extensively development of enterprise & company
