Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> Modern Stuff
> Beer shank 5 1/8" draft keg tap home bar kegerator
Beer shank 5 1/8" draft keg tap home bar kegerator
5-1/8" Long Shank with Nipple Assembly - 3/16" I.D. Bore
5-1/8" Long Beer Shank with Nipple Assembly / 3/16" I.D. Beer Line Connection / Forged Brass Lock Nut / Black Plastic Flange / Faucet Coupling and Sleeve / Used to Attach Beer Line to a Faucet Through Wall, Refrigerator Door, Cabinet, etc.
This shank is 5-1/8" long measured from the end of the threading to the end where the faucet attaches. A shank is used to attach a beer line to a faucet. The shank is mounted through a 1" hole in a wall, refrigerator door, cabinet, etc. The shank comes with a black flange on the front and a compression ring on the back. The compression ring is used to secure the shank to the mounting surface. The 5-1/8" shank is used on most refrigerators. All shanks come fitted with a tail piece for beer line connection. Faucet is not included. Larger and smaller sizes are available.
* 5-1/8" Length (Measured from the end of the threading to the end where the faucet attaches)
* 3/16" ID Beer Line Connection
* Faucet Coupling and Sleeve
