Environmentally Conscious and Economically Sound Machine Dismantling Forum   >   Gurnee   >   Modern Stuff   >   Computer Controlled Machinery   >   Schmalz panel lift ergo 85 woodworking machinery

Schmalz panel lift ergo 85 woodworking machinery


DEMO MODEL MACHINE WITH FULL FACTORY WARRANTY! NEW CONDITION!
1 JumboErgo 85 with 1 free standing jib crane.
JUMBO ERGO 85 with 185 lb non-porous lifting capacity complete with:
- Automatically activated valve system to "lock on" to work piece. User-friendly
"motorcycle twist-grip" for variable sped control of the system.
- 4.8 HP standard SB-M direct drive blower:
Electrical requirements 208-230/460V-3PH-60Hz.
Also available with 575V motor for Canada.
Blower with 110 CFM airflow, 14.7" Hg suction,
- 7.0" diameter lift tube, reinforced with 12 ga wire and PVC material. 74" lifting stroke.
Standard adjustable "hovering height" control.
Non-return safety valve contains vacuum in case of power failure allowing load to safely
descend before release. 360 degree rotation on bearing-mounted top swivel.
High gloss gray powder-coat finish.
- Blue nylon protective tube cover.
- STF2-P4.5 heavy-duty dust filter.
JOB SPECIFIC REQUIRED ACCESSORIES
Valve pipe 500 mm for Jumbo to extend operator handle out 20" from lift tube center
Double vacuum gripper, adjustable suction pads on a beam
Cross-beam length (long.): 1200 mm
Suction pad material: Perbunan NBR
Suction hose VSL/G 50 PVC for Tube lifter JumboErgo/Sprint
Suction Hose Connector for Jumbo. Connects 50 mm ID hose to blower, dust filter and lift tube.
Protective motor switch for 3phase motor with 10-16 amp adjustable rating and outer enclosure box.
For SB-M blower at 208/230V-3phase.
Gorbel WSJ360-250-10-16 freestanding jib crane
with 360 rotation, 250 lb capacity, 16 ft span, and 10 ft height under boom. Includes festoon trolleys. If crane
will be mounted to a 6 inch deep reinforced concrete floor, baseplate must be centered on a 5.5 ft x 5.5 ft
area which is free of cracks, seams and expansion joints. Anchor bolts are not included.
NOTE: SUPPLY VOLTAGE MUST BE VERIFIED ONCE ORDER IS SUBMITTED (208V, 230V OR 460V)
and Conditions of Sale, Sec 4a.
electrical parts, which are warranted for a period of six months. Normal wear and tear items (i.e., bearings,
belts, fuses, tooling, light bulbs, etc.) are not covered.
Demo Model Machine: Comes with full warranty!