Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> New fieldpiece digital multimeter LT17A hvac
New fieldpiece digital multimeter LT17A hvac
NEW FieldPiece Digital Multimeter LT17A HVAC
Ranges: 200mV, 2000mV, 20V, 200V, 600V
Accuracy: 1.2% 4(200mV to 20V ranges), 2% 4(200V, 600V ranges) Input impedence: 10 milliohm
Ranges: 200 micro A, 20mA, 200mA
Ranges: 200 ohms, 2 k ohms, 200k ohms, 20M ohms
Accuracy: 1.0% 4 (200 ohm to 200k ohm ranges), 2.0% 4 (20M ohm range)
Open circuit voltage: 0.3VDC typical, (3.0VDC on 200 ohm)
Open circuit voltage: 3.0VDC typical
Ranges: 200 micro F, 2k micro F, 20k micro F
Ranges: -30 to 1400 F (-34 to 750 C)
Accuracy: 1 F; 32 to 120 F ( 0.5 C; 0 to 48 C), 1.0%+1.5 F; -4 to 750 F ( 1.0%+1.0 C; -20 to 399 C) 3.0%+4 F; -30 to -4 F and 750 to 1400 F ( 3.0%+2 C; -34 to -20 C and 399 to 750 C)
Sensor type: K-type thermocouple
Field Calibration (temp offset pot)
The LT17A can be easily calibrated on the job. Use a bucket of ice water to have a known 32 F (0 C) temperature. With the thermocouple in the ice water, adjust the TEMP OFFSET pot on the face of the meter until it reads 32.0 (0.0).
Fuse Replacement: When only certain ranges quit working, check the fuse. Open the case and replace according to the Overload Protection values below. If that doesn't work visit our Warranty Page to check for other problems.
