Environmentally Conscious and Economically Sound Machine Dismantling Forum > Gurnee
> Welding and Laser Cutting
> MIG Welding with MIG Wire
> Intermatic T1976 24 hour dial with skipper time switch
Intermatic T1976 24 hour dial with skipper time switch
The T1900 Supervisor Series provides up to 96 operations (48 ON/48 OFF) every 24 hours. This series provides operations with minimum ON/OFF times of 15 minutes. Trippers slide in and out of dial for fast accurate setting. The skipper models provide for operations to be omitted on selected day(s) of the week. Models with carry-over provide a minimum of 16 hours of carry-over to maintain preset schedules within 2% accuracy during power failures. The carry-over automatically rewinds when power resumes. Only one hour is required to rewind the carry-over for each two hours of power outage. These switches are ideal in areas where shorter duration ON/OFF times are required and power outages occur entailing costly resetting.
Case Drawn steel 7-3/4" (19.7 cm) High, 5" (12.7 cm) Wide, 3" (7.6 cm) Deep in gray finish. Spring hasp, with hole for lock, holds permanently attached, side hinged door closed. Three mounting holes on back plus handy box mounting holes.
Knockouts Combination 1/2"-3/4" nominal knockouts, one on back and each side of case and two on bottom.
Optional Enclosures See Time Switch Cases for optional enclosures.
Special Voltages and Cycles See Time Switch Motors for available motors.
Switch Rating 20 Amp maximum 125, 208-277 and 480 VAC; 1/2 HP , 125 VAC; 1 HP, 250 VAC
Power Input 5 Watts maximum.
