Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Agriculture and Food
> Ploughs
> Husqvarna partner K750 300MM 12" oil guard disc cutter
Husqvarna partner K750 300MM 12" oil guard disc cutter
HUSQVARNA K750 PETROL POWER CUTTER (OIL GUARD)
The new Husqvarna K 750 with OilGuard is a version of the Husqvarna K 750. The K 750 OilGuard with OilGuard oil uses an optical detection system to detect if there is oil in the fuel or if the oil type is wrong.
The engine, with DualCharge , provides more power, lower fuel consumption and greatly reduced emissions.
The Active Air Filtration has been upgraded with a redesigned paper filter, for even better dust control.
Built-in automatic filter compensation, maintains high power and lowers fuel consumption.
Patented, dust-sealed starter unit, where the return spring and the pulley bearing are sealed. This makes the starter virtually maintenance free, giving a further boost to the reliability of our cutters.
EasyStart ensures 50% easier starting by reducing the compression in the cylinder during starting.
All Husqvarna's our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.
The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.
Sealed transmission reduces the wear and slippage risk.
Fuel indicator on the tank shows fuel level, to help avoid unnecessary stoppages.
Self-lubricating clutch bearings for extended work life.
Several models are equipped with a Poly-V belt, for better transmission of power, far longer product life and extended service intervals.
With Husqvarna OilGuard you avoid engine damage resulting from an incorrect fuel-oil mixture.
OilGuard oil is a high quality product, developed specially for dusty environments such as building sites. The oil is easily recognized by its yellow color.
OilGuard oil works excellently in all engines that require two-stroke oil.
It is also possible to use regular two-stroke oil in a K 750 OilGuard machine: simply remove the OilGuard button by the rear handle. However, remember that by doing this you deactivate the OilGuard function.
25% less noise thanks to a larger muffler.
Integrated holder for T-wrench isolated near the water connection.
Power/weight ratio 0.39 / 0.38
Weight (excl. cutting equipment) 2 values 9,4/9,7 kg
Vibrations front handle, 2 values 3,2/3 m/s
Vibrations rear handle, 2 values 4,6/5 m/s
Sound power level, LWA 113 dB(A)
