Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Antiques
> Anvils
> 7.5 hp us motors severe duty motor 230-460 v 3 phase
7.5 hp us motors severe duty motor 230-460 v 3 phase
230 - 460 VOLT / 3 PHASE / 1185 RPM / 254T FRAME
Designed for pulp & paper, mill & chemical and any other
severe duty environments found in the process industries.
THIS APPEARS TO BE A NEW MOTOR IN VERY GOOD CONDITION
THE BOLTS BROKE LOOSE FROM THE ORIGINAL PALLET AND IT ROLLED ON IT'S SIDE
WE INSPECTED THE MOTOR AND DISCOVERED THAT THERE WAS NO MAJOR DAMAGE
JUST A FEW COSMETIC PAINT SCUFFS & THE PICKUP RING IS BENT
WE ALSO TESTED THE MOTOR AND IT OPERATES FINE
PLEASE REFER TO OUR VIDEO TO WATCH THE MOTOR OPERATE
Totally Enclosed Fan Cooled (TEFC) Corro-Duty Premium Efficient
* Class F Insulation, Class B Rise At Full Load (4)
* All Cast Iron Construction (Steel Frame & Fan Cover On 140 Frame)
* Corrosion Resistant Mill & Chemical Duty Paint
* Stainless Steel Nameplate (with CE Mark) & Zinc Plated Hardware
* Shaft Slinger On Pulley End For IP54 Protection
* Precision Balance (< 0.08 In/Sec Vibration)
* 40C Ambient, NEMA Design B Performance (4)
* Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up
* Double Shielded Bearings 140-360, Open On 400-440
* Oversized Conduit Box - 1 Size Larger Than NEMA Standard
* Cast Iron Inner Bearing Caps (180 Frame & Larger)
* Field Convertible To F2 Mounting 180 Frame & Larger
We are forklift equipped & pick-up hours are: 10am - 4 pm Monday - Friday
Florida residence and local pickup must pay 7% state sales tax
Due to the fact that we sell a wide variety of merchandise, we need to adhere to a ONE POLICY system when selling.
While we use due diligence in the creation of our listings and we attempt to cover every possible detail about the asset we are selling.
There are no warranties or guarantees; expressed or implied of any kind on our items we sell.
All items will be packed to meet or exceed carrier requirements.
We are not responsible for any of the items we sell after it leaves our facility.
@ 1-(***)-323-5441 (M-F 7am to 7pm CT)
