Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Antiques
> Leather FLat Belt Eqiuptment
> : hubbell 3P4W 20A 480V iec pin & sleeve connector
: hubbell 3P4W 20A 480V iec pin & sleeve connector
HBL420C7W - Pin and Sleeve Products
Watertight IEC Pin and Sleeve Connector 3P4W, 20A 3PH 480V
#14 To #10 AWG copper wire only
UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC
600V RMS (i.e.minimum creepage distance 10 mm minimum)
Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
Per CSA C22.2 No. 182.1 / UL1682.
Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
Terminals identified in accordance with North American and IEC conventions.
Identification and ratings are a permanent part of the device housing.
HB or Better per UL 94 or CSA C22.2 No. 0.17
Maximum Continuous: 75 C; Minimum Continuous: -40 C w/o impact.
UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.
Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
