Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Electrical Machinery
> Transformers
> Home brew kegerator conversion kit keg beer tap shck-nt
Home brew kegerator conversion kit keg beer tap shck-nt
Standard Homebrew Kegerator Conversion Kit
Enlarge Standard Homebrew Kegerator Conversion KitEnlarge Image
The Standard Homebrew Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator into a home brew dispenser. All the draft beer parts are of the highest commercial grade quality which are designed and built to last.
The Standard Homebrew Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator into a home brew dispenser. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. The standard kit has a Pro-Line double gauge regulator upgrade over the single gauge regulator found in the economy kit.
STANDARD KEGERATOR CONVERSION KIT COMPONENTS
3. One Gas in Gray Ball Lock Connector (for Pepsi, Cornelius Kegs) with 1/4" male flare fitting that ends in a 5/16" hose barb. This Quick Disconnect Coupler is of a Ball Lock design that works with Cornlelius pepsi kegs. This connector is gray (gas) and has a male 1/4" thread for a flare fitting. This connector already has attached is a special 1/4" nut that has a 5/16" hose barb attached. The purpose of the hose barb is to match the same barb size found on your standard Co2 Regulator. The standard air line assembly will connect properly and tightly with this connector.
4. One Beverage out Black Ball Lock Connector (for Pepsi, Cornelius Kegs) with 3/16" hose barb. This Quick Disconnect Coupler is of a Ball Lock design that works with Cornlelius pepsi kegs. This connector is black (beverage) out with a a 3/16" hose barb attached. This connector connects directly to your standard 3/16" beer line.
5. 5 Feet of Homebrew Beer Line Assembly with two Plastic Clamps.
6. 4-1/8" Long Shank with Nipple Assembly. This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. A shank is used to attach a beer line to a faucet. The shank is mounted through a 1" hole in a wall, refrigerator door, cabinet, etc. The shank comes with a black flange on the front and a compression ring on the back. The compression ring is used to secure the shank to the mounting surface. All shanks come fitted with a tail piece for beer line connection.
7. Chrome Plated Faucet with Brass Lever. This premium quality faucet features a forged brass body with a highly polished chome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles
8. Comes with black ABS plastic Faucet Knob.
10. Standard Specialty Faucet Wrench
11. Detailed Instruction/Installation Manual.
All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-(***)-710-9939.
