Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Tips and Advices
> How to be environmentally consious
> Biosystems sperian PHD6 + IQ6 station 02/CO2/H2S/lel/co
Biosystems sperian PHD6 + IQ6 station 02/CO2/H2S/lel/co
BIOSYSTEMS SPERIAN PHD6 WITH IQ6 AUTO CALIBRATION
TOP OF THE LINE & ONE OF THE EASIEST INSTRUMENTS TO OPERATE AND CALIBRATE
Confined space entry 5 (or 6 )-gas monitor.
Configured for CO2/I-R, H2S, O2, CO, LEL.
Fully checked over and calibrated.
Purchased March 2009 and used only a few times.
Manufacturer's Warranty to March 2011
Clean and unmarked condition, could pass for new.
(few minor scuffs on the screen that look worse than they are because of camera flash)
This is not a cheap system, but if you like fully automatic calibrations
This is a complete and automatic calibration system.
Once you hook up the gas lines and USB port or Ethernet
(only required to change configuration)
Just drop the monitor into the IQ6 to bump test (or calibrate) and walk away.
It even charges the battery before a test (if required) & fully charges it afterwards.
Every day if your needs dictate absolute reliability.
or into the desktop charging cradle TO CHARGE ONLY.
all firmware/software has been updated to current.
Supplied with everything you need to set it up and get it working.
I'll even include 3 (required) demand regulators for the gas cylinders.
These cost $350.00 each (x3) & are included free.
1x 4-gas "required" - 50ppm-CO, 25ppm H2S, 50%LEL (Methane), 18% O2.
1x "ZERO AIR" & 1x 2000ppm CO2 (for CO2 sensor only)
PLEASE CLICK THIS LINK FOR ALL PHOTOS
MANUFACTURER'S DATA-&-MANUALS-ETC-PHD6
MANUFACTURER'S DATA-&-MANUALS-ETC-IQ6
Discounted retail pricing here (better sit down for these)
Photobucket Photobucket Photobucket Photobucket PhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucket
SO PLEASE DON'T THINK I'M OVERCHARGING.
