Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Tips and Advices
> How to be environmentally consious
> Usb isp programmer for avr atmel tiny mega
Usb isp programmer for avr atmel tiny mega
* Plastik box in modern USB stick design, no danger of short circuit
* Standard USB controller (SiLabs CP2102) adapted for WindowsXP- WindowsVISTA- Windows7, Linux, MacOSXy
* 6 pole standard ISP connection
* STK500v2 or AVR910/911 protocol
* Very fast because of "double buffering" and auto ISP-Speed-Detect
* Compatible to AVRStudio, BASCOM, CodeVision, myAVR Workpad, SiSy AVR and many more
* Programming voltage 5 V and 3 V (selectable via software)
* 3 LEDs for status indication (red/green/blue)
* an absolute ISP-Programmer for Atmel AVR microcontroller in USB stick design
* Many AVR systems can be programmed very fast and easily via the USB interface
* It is extra fast through the double buffering and
* There is no danger of short-circuit through open conductor plates because the programmer is in a case
* Integration in the operation system and programming software are completely trasnparently through a virtual COM port
* the integrated and intelligently Modul allowed you to program system from 3,3 V until 5 V
* The programming voltage can be dynamically switched via Software
=> By default, the power supply of mySmartUSB light is only provided during the firing!
* The programmer will be delivered with the firmware STK500 V2 /(standard)
* You can also put the firmware AVR911 / 910 / 109 as alternative on it
* The firmware, which the programmer will be delivered with, has an automatically step-down-mode
* for controller which must be switched to slower clocks under 1 MHz and which can't be activated with the standard ISP Speed
* Updateable because of the preinstalled Bootloader
* therefore you can update the firmware for new protocols or controller types
* The myAVR Software products suppoer the mySmartUSB light extra efficient
It could be used directly and easily from the AVR studio or with BASCOM and other developments
* Windows CE, Windows 2000 / 2003 / XP / Vista / Windows 7
* has traffic, error and status indication
* simply insert it on the PC or notebook just like an USB stick and it is already supplied with voltage that way
* therefore, for many case there is no external power supply unit (e.g. battery) needed for the aim system
* Ideal for notebook users as the programmer doesn't need a parallel or serial port!
* Operational current: 10 - 20 mA typically without further consumer until 100 mA by connection on the aim system
* Operating temperature: 0 - 30 C
* Dimensions: 60 mm x 30 mm x 12 mm
Supported controller types (selection):
* ISP cable, 6 pole (flat cable)
Software and documents are in CD. More available in internet:
