Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Welding and Laser Cutting
> TIG Welding of Non Ferrous Metals
> Dynapro ergotouch 3010 touch screen industrial computer
Dynapro ergotouch 3010 touch screen industrial computer
DynaPro ErgoTouch 3010 Touch Screen Industrial Computer
This is a DynaPro ErgoTouch 3010 industrial computer with a 10.4" COLOR LCD display and a touchscreen interface. This unit is used, in Good cosmetic condition with a few minor blemishes from installation/removal (see photos). There is also one corner of the rear panel heatsink broken off, as shown. The touch and display area have a few minor scuffs from use that do not interfere with the display or touch input functions. The computer boots with no errors into control software for a Ward Machinery Company machine. We were able to click around in the machine software using the touch interface. No other testing was done.
3M took over the DynaPro line a several years ago; the description below is from the 3M website. NO manuals or additional accessories are included if not shown. Please NOTE: There is a latch, so the cover stays closed, but the (4) cover screws are gone. Also, the side cover that seals the connectors is missing. Photos show the actual item you will receive.
Dynapro ErgoTouch 3010 Series A Rev. 1.9 Factory Options:
* DB-25 Serial port capable of RS-232E, RS-422A, and RS-485
* RJ-45 10Base-T (network) port
* Female DC-15 AUI connector
* External floppy drive connector
* Expansion slots (2pcs. open 16-bit 3/4 length ISA slots inside)
The ErgoTouch Computer is a small, lightweight, ergonomically-designed and environmentally-sealed interactive computer built for continuous use in harsh industrial environments.
