Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Welding and Laser Cutting
> TIG Welding of Non Ferrous Metals
> Usb programmer for ATMEGA8, ATMEGA168, ATMEGA328 etc
Usb programmer for ATMEGA8, ATMEGA168, ATMEGA328 etc
This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware. For those interested, the firmware source code can be downloaded from the USBasp website.
* Support for AVRDude from version 5.2 onwards
* Allows you to to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits
* Support for Linux, Mac OS X and Windows (will work on vista)
* 5 KB/sec maximum write speed
* SCK option to support targets with low clock speed (< 1.5MHz)
* 10 pin and 6 pin ISP interface
These programmers are a perfect companion to the Protostack 28 pin AVR Development Board or the Protostack ATMEGA8 Development Kit.
Supported microcontrollers include:
Programmer for ATMEL AVR Microcontroller
AVR Programmer connected to ATMEGA8 development board
Windows drivers can be downloaded from http:// /download/USBasp-driver-0.1.12.2.zip
A users manual can be dowloaded from http:// /download/Users Guide (AC-PG-USBASP-UG-V1.2).pdf
* The item being sold is a new version and does not have the slow clock jumper. This is because you can now set the slow clock using the AVRdude -B option
