Environmentally Conscious and Economically Sound Machine Dismantling Forum   >   Madison, WI   >   Antiques   >   Cast Iron Machines   >   Festo directional solenoid air valve mfh-5/3E-d-1-c

Festo directional solenoid air valve mfh-5/3E-d-1-c


FESTO Directional Solenoid Air Valve MFH-5/3E-D-1-C
Festo MFH-5/3E-D-1-C (150983) Directional Solenoid Air Valve New out of Box in Excellent Condition
Solenoid valve MFH-5/3E-D-1-C Solenoid valve MFH-5/3E-D-1-C
Solenoid valve With manual override, without solenoid coil or socket. Solenoid coil and socket should be ordered separately.
Standard valves with port pattern per ISO 5599/1 assure rapid valve replacement anywhere throughout the world. Approved for use in the automotive industry. The port pattern per ISO 5599/1 assures a defined interface between valve and sub-base.
- 24, 42, 48, 110, 230, 240 V AC
- Electrically or pneumatically actuated valves
- Electrically actuated valves with or without separate auxiliary pilot air
- Manual override for electrically actuated valves
- Double solenoid valves with dominant signal
- Sub-base valves without sub-base
- Single solenoid with pneumatic or mechanical spring return
- JMN1H, JMN1DH, MN1H without solenoid coil and plug socket
- Standard plug with pin assignments per DIN 43 650 type A
- JMFH, JMFDH, MFH without solenoid coil and plug socket
- JMEBH, JMEBDH, MEBH-...-ZSR with solenoid coil without plug socket
- JMDH, MDH with or without solenoid coil and plug socket
- JMEBH, JMEBDH, MEBH with solenoid coil without plug socket
- Standard plug with pin assignments per DIN 43 650 type C
- Internationally standardised port pattern
- Auxiliary pilot air connection by turning the seal
- LED indicator for switching status on valves with central plug
- Captive mounting screws and seal
- Pilot valve with CNOMO interface
Manual override tool, detenting, with AHB-... actuator attachment
- Ports on bottom, NAU-...-ISO
- Manifold sub-base NAV-...-ISO, ports on bottom
- Sub-base with angled connections NAW-...-ISO, ports on side
- Sub-base with angled connections NAVW-...-ISO, ports on side and bottom
- Blanking plate NDV-...-ISO for closing off vacant positions
- Isolating disc NSC-...-ISO for the creation of pressure zones with common lines 1, 2 and 3
- Intermediate plate NZV-... for connecting size 1 and 2, size 1 and 3, and size 2 and 3 manifold sub-bases
- Flow control plate GRO-ZP-...-ISO-B, exhaust air restrictor for ports 3 and 5
- Intermediate pressure regulator plate LR-ZP-... for regulating pressure at ports 1, 2, 4, 2 and 4
The flow control plate and the intermediate pressure regulator plate for ISO sizes 1, 2 and 3 is mounted between the valve and the individual sub-base or manifold sub-base.