Environmentally Conscious and Economically Sound Machine Dismantling Forum   >   Madison, WI   >   Electrical Machinery   >   Inverters High Power   >   6' wet bench etch station ultrasonic solvent hood

6' wet bench etch station ultrasonic solvent hood


6' semiconductor wet etch bench work station
equipped with an 2 ultrasonic tanks and ultrasonic power supply
* Two etch / rinse polypropylene sinks
* 6" x 6" Thermolyne hot plate
* Omega resistivity meter to monitor the quality of rinse water
* Two stainless ultrasonic solvent tanks with Delta Sonic power supply included
* Air flow with Dwyer Photohelic, pressure gauge monitoring
Placed on the back of the bench:
* This equipment is used and has been de-installed from the research facility of a large Arizona semiconductor manufacturer.
* The left side of the bench was used for light acidic rinse
* The right side ultrasonic tanks were used with solvent
* The bench may need dusting and general cleaning
* The equipment appears in good workable condition and powers up
* We have no means of fully testing it
* There is no manuals available
The weight is estimated roughly at 400 lbs. A forklift will be available at the site to facilitate loading.
http:// /documents/for_sale/wet_bench.html



6' wet bench etch station ultrasonic solvent hood 6' wet bench etch station ultrasonic solvent hood 6' wet bench etch station ultrasonic solvent hood 6' wet bench etch station ultrasonic solvent hood 6' wet bench etch station ultrasonic solvent hood 6' wet bench etch station ultrasonic solvent hood