Environmentally Conscious and Economically Sound Machine Dismantling Forum > Madison, WI
> Electrical Machinery
> Inverters High Power
> Hp agilent 8510B network analyzer 8515A s-parameter ++
Hp agilent 8510B network analyzer 8515A s-parameter ++
HP 8510B Network Analyzer with 8515A S-Parameter test set & THREE kits
This set was rack mounted, none of the pieces have their footpads. The cables included are not the original HP cables, with the exception of the GPIB cable 10833A. The connecting cables from the dispaly section to the IF/Detector section were made by our engineer. The cables do work. The network analyzer & the S-Parameter does work.
85101B Display Processor, has option 010 Time domanian capability, & very good crt- intensity was not turned all the way up. s/n 2427A00283
85102B IF/Detector, has no options, some small scratches near the very bottom of the section- around the aux menus buttons, s/n 2531A01166
8515A S-Parameter test set, has no options, some small scratches around the bottom of the Port 2 connector, s/n 2537A00680
8510A NOT the 8510B manual set on CD, 5 volume set
Two Amphenol APC-7 to APC3.5(sma)(m) connectors in original wood case
85053A verification kit 3.5mm, s/n 2340A00194
85050A Calibration kit 7mm, s/n 2340A00209 OPT 010
85052A calibration kit 3.5mm, s/n 2340A00200 OPT 010
The calibration verification kits have had their foam insides replaced. We are not sure the contents are all there. They sure do look complete. The right to return is not extended to the kits. PLEASE ask any questions about the kits.
Net weight is 145 pounds, shelf W2
