Environmentally Conscious and Economically Sound Machine Dismantling Forum > Madison, WI
> Tips and Advices
> Thermo-shaker for microtubes, cooler, incubating shaker
Thermo-shaker for microtubes, cooler, incubating shaker
Thermo-Shaker for Microtubes, Incubating Microplate Shaker (Digital)
Cooling, Heating & Shaking for Plates and Tubes
Temp. range: 0 ~100 ; Speed: 200- 1500 rpm; Timer: 1-99h59min
Cooling,Heating & Shaking for Plates and Tubes
See Eppendorf similar products Thermomixer Dry Block Heating Shaker
Thermo-Shaker for Microtubes MSC-100
Designed for simultaneous heating and cooling and mixing of small samples, the MSC-100 are supplied with interchangeable platforms for r microtubes.
Mixing and heating and cooling modes can be used both simultaneously and independently, i.e. the device can work as a shaker and as a thermostat. The main body of the Mixing Block can be used with different kinds of blocks.
1. LCD display. It easy to setup and use.
2. Accurately control and display time, temprature and speed
3. Over heating protection device ensures safety & reliability
5. Temperature can be calibrated to meet user's needs.
6. Low noise working even under the speed of 1,500rpm
7. Conforms to CE safty standard
8. Custom blocks are available to satisfy experimental requirement
9. Gental, reliable mixing with long-life direct current motor
Temp. Control Accuracy: 0.5
Heating Time: 20min (from 20 to 100 )
Cooling time: 25min(from ambient to ambient - 20 )
1) The block temperature can be descended to 0 if the ambient temperature is 20
2) The block temperature can be descended to 4 if the ambient temperature is 25
3) The block temperature can be descended to 10 if the ambient temperature is 30
Cooling and Heating Parts: TE Module
Supply Power: AC220V 50/60Hz or AC120V 50/60Hz
Dimension ( LxWxH) mm: 300x220x170
