Environmentally Conscious and Economically Sound Machine Dismantling Forum > Madison, WI
> Welding and Laser Cutting
> MIG Welding with MIG Wire
> Coin counter digital scale
Coin counter digital scale
The Coin Counting Scale is a high capacity scale for counting all coins issued in your country. It is also switchable to weigh in three weighing modes - Pounds and Ounces, Grams, Troy Pounds and Ounces. It can also be programmed to count other items after the user programs the weight of ten such items.
Download data sheet for further information
*The picture is representative of the item only. Actual item may be slightly different.
The coin counting scale does not just weigh, it can count all the different kinds of coins. It displays the value ($ or ) or quantity of the coins. Moreover, the scale has a separate read/write memory for each kind of coin. Thus, you can easily determine the value of a bunch or packet of coins you have. This is time-saving and very useful for sellers and people who handle a lot of coins such as vending machine earnings.
The scale can also count items other than the specified coins by just sampling 10 such similar things on the platform. This is toggled in the gram key.
Weight display in three weighing units
- Pounds and Ounces (lbs & oz)
- Troy Pounds and Ounces (lbs oz t)
Whether you are in the office or in your kitchen, something always crops up where you need to weigh. Accurately measure your ingredients and prepare the best recipes.
Very reasonably priced - Remember that we manufacture the scales.
A user's manual, which can be clearly understood even without technical know how.
Technical support and 90-day warranty.
Easy to read liquid crystal display.
Mechanical overload protection and under load protection
: Unlimited (Up to the scale's capacity)
: Tare function will set negative to 0 without add-on
: Allows tare up to max tare upon turn on, but this will not extend the measuring range on the scale
: Advance Calibration Five points of Automatic advance calibration for greater accuracy
User Calibration One point of automatic user calibration at 1kg.
In the event that the scale loses accuracy , recalibration may be required if the load cell of the scale is overloaded due to dropping something heavy on the scale, or dropping it.
: AC Adaptor: 9V, 100mA(supplied)
Battery: 6(AA)X1.5V (not supplied)
: 2 lines with 16 characters dot matrix liquid crystal, with clear protective Plastic Bezel
: Auto-off after 5 min. of no Load Charge or Key Pressed in battery operation.
To help in the tracking of the base frequency Remove Weight", "Underload"
: Good performance within -10 degree Centigrade (0C) to +45 degree Centigrade (0C)
or 14 degree Fahrenheit (0F) to 113 degree Fahrenheit (0F)
The scale is designed to operate in normal room temperatures. If subjected to cold or warm temperatures, it should be allowed to reach room temperature before operating.
: Fine texture ABS plastic or equivalent.
: Four element single strain gage with temperature compensation.
: Material: 2024 - T4/T351 Aluminum Alloy
Dimensions : 26.5cm X 20cm X8.3cm
Weight : 1134g without Batteries
We back your purchase with technical support and a 90 day warranty. Our warranty gives your purchase Peace-of-Mind - these products are fully calibrated, tested and have a warranty.
Our email support is located in a different time Zone (Asia) - but we answer every email received from Monday to Friday GMT+6- so please do not hesitate to ask questions or request a datasheet.
