Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Electrical Machinery
> Refrigeration
> Zero pulsar ii, sand blasting cabinet model pulsar ii
Zero pulsar ii, sand blasting cabinet model pulsar ii
Zero Pulsar II, Sand Blasting Cabinet
Model: Pulsar II - Suction Blast
30 CFM Required for continuous use
Inside Cabinet Dimensions: 34" x 34" x 31"
Here's a look at our Zero Sand Blast Cabinet:
The information below is taken from the Clemco Zero web site for the Pulsar III unit. Ours is similar but a Pulsar II and made in 1995.
Pulsar III Suction Blast Cabinet
The first industrial, all-in-one blast cabinet includes blast system, true media reclaimer, and modern reverse pulse cartridge dust collector. Fully equipped to handle most common recyclable blast medias, the Pulsar III overall dimensions are 76" H, x 38" W x 62"D. Working chamber dimensions are 37" H x 36" W x 35" D.
20159 - Pulsar All-In-One Cabinet Brochure
23340 - Options Plus for Abrasive Blast Cabinets
Filter cartridge is automatically cleaned each time the pedal is operated. Pull-through exhaust fan reduces wear on impeller blades. Unique Air Logic System maximizes air flow to the blast nozzle. Door safety interlocks interrupt blasting if either door is opened. Tough, full-length gloves protect the operator's hands and arms. Large window and top-mounted light allow clear view of work. Blow-off gun clears away dust and media after blasting.
Rubberized wear-plate prolongs reclaimer life.
Each Pulsar component has been engineered to work in balance with the whole system. Capacities for the sump, reclaimer, dust collector, and blast system are perfectly matched.
Because the components are housed in one cabinet, routing of hoses and tubes is simple and direct. The result is a cabinet that's easy to install, easy to use, and easy to maintain.
We build Pulsar cabinets to stand up to years of heavy industrial use. The blast enclosure and support structure are made from 14-gauge and heavier steel. Formed-in-place stress members prevent cabinet warping and buckling.
The double-wall, sound-insulated doors and the door frame, form an edge baffle and positive seal to prevent the escape of dust and abrasive.
Tilt-out window allows tool-free window replacement in minutes.
The top-mounted light module features an abrasive-resistant Lexan cover and twin fluorescent bulbs.
The tilt-out frame makes changing the tempered-glass window a snap.
An independently adjustable pulse regulator maximizes cartridge-cleaning effectiveness and minimizes noise.
Lift-off hinges let you remove and replace the door in seconds, without tools.
Side access allows easy adjustment and maintenance. Emptying the dust drum or replacing the filter cartridge takes just minutes. Side
access puts the reclaimer door, the metering valve, the moisture separator, and the pulse pressure regulator with gauge at your fingertips. On the Pulsar VI-P, you can reach the pressure vessel's hand hole and metering valve from the side.
Pulsar controls are conveniently located within the operator's reach. The operator can easily adjust air pressure while blasting to suit the application.
The cabinet-top-mounted light module creates full-view, uniform lighting inside the cabinet, and is easily serviced.
Positive latches pull the doors closed tight. Lift-off hinges allow you
to swap the standard door for a pass-through door, a vestibule door, or a door fitted with our standard tumble basket. (All are available through Clemco's Options Plus program)
Remove rust, millscale, heat scale, and carbon build-up Strip paint, powder coating, plating and anodizing Eliminate burrs, parting lines, and flashings
Extract residual sand from castings
Beautify steel, stainless steel, aluminum, brass and other metals
Etch artwork and lettering into glass, stone, plastics and metal
Clean residue and release agents from molds
