Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Tips and Advices
> Forum Tips
> Commercial door aluminum pull push bar w/ grip handle
Commercial door aluminum pull push bar w/ grip handle
Offering a commercial aluminum pull/push bar door handle and grip handle. Probably used on glass doors in banks, commercial buildings or restaurants. These handles appear to be new, but we are not sure. Were found unboxed on a shelf in an old time hardware store. Have some scratches and nicks.
Measures 32 1/2" tall x 1 1/2" and is 1/2" thick.
Pull handle section raises up approximately 2" above mounting portion.
Has two 3/8" mounting screw holes, one on top, one on bottom.
Assembly measures 40 1/2" across and is 9 5/8" at its tallest point.
It measures 7 1/2" from top bar to bottom of second bar.
Center bar measures 38 1/2" x 1 1/2" and is 1/2" thick.
The end mounting pieces measure 2 1/4" x 9 5/8" and 1/4" thick.
Each side is mounted with 4 screws. One end plate has a 1 1/4" diameter hole drilled out for a lock cylinder.
Has a vertical support bar near cylinder hole end which measures 3/8" x 10 1/2".
Please email any questions, emails answered as soon as possible. Additional pictures available upon request, please include your email address. I try to describe my items as best as I can, but may have missed something you need to know.
