Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Tips and Advices
> Forum Tips
> Super-soft 2 veneer softener for burl & quilted wood
Super-soft 2 veneer softener for burl & quilted wood
Super-Soft 2 Veneer Softener flattens crotch, burl, and other wavy veneers by temporarily plasticizing wood cells. Super-Soft 2 prevents splits and cracks by instantly making veneers unbelievably flexible without affecting the wood's staining and finishing properties. Apply by dipping, spraying, or brushing. No mixing required. Watch the video and see how well this stuff works on a burl veneer.
Size: 1 Quart (sprayer included)
1. Use in a well ventilated area.
2. Use full strength, do not mix with water Apply by dipping, spraying, or brushing .
3. Allow veneers to stand until the surface appears dry .
4. Place veneer between two sheets of masonite or scrap laminate and apply weight to top or place in vacuum press overnight.
5. Remove from press and place absorbent paper between each sheet and re-apply weight .
6. Replace absorbent sheets every 3 hours until veneer is completely dry .
Super-Soft 2 may also be dried with a household clothes iron on the low/medium setting. Be sure to do this in a well ventilated area and wear appropriate eye and skin protection.
Will the softener affect the ability of the veneer to take a stain?
Despite the very slight tint of the softener, it will not affect the veneer's ability to accept a stain or dye.
What's the best method of application?
Spraying is the most efficient way to apply Super-Soft 2.
No. Unlike our competitors, we offer it in a chemical formulation that is not flammable.
What is the shelf life of the softener?
The shelf life is indefinite. It should last forever.
How long will softening effect last?
For some reason, this varies from veneer to veneer. Some users are finding the flexibility so remain for as long as 2 weeks. Generally speaking, you can expect the effects to last between 4 and 7 days.
Can this be used for flattening wavy veneers too?
Yes! Flattening is its main use.
Will Super-Soft 2 make the veneer sticky like homemade softener?
Not at all. The veneer will feel soft and pliable not sticky and brittle.
What happened to Super-Soft 1?
We no longer offer the original formula because it wasn't suitable for use with "clothes iron curing" and the effects were not as strong as the newer version.
I shot the picture at the right to give you an idea as to how well Super-Soft 2 works. This image shows madrone burl veneer rolled around a pencil. There are no cracks or splits. If I can roll a burl veneer this tight, you can probably imagine the possibilities with complex veneering projects! (Click the image to enlarge)
