Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Tips and Advices
> How to be environmentally consious
> 115A anodizing copper nickel anodize plating rectifier
115A anodizing copper nickel anodize plating rectifier
115A ANODIZING COPPER NICKEL ANODIZE PLATING RECTIFIER
PLEASE READ ALL OF THE FOLLOWING TEXT BEFORE PURCHASING, IF YOU NEED MORE INFORMATION, PLEASE CALL ME AT MY TOLL FREE NUMBER (***)-544-3746 9:00AM TO 6:00PM PST MONDAY - FRIDAY AND I WILL BE HAPPY TO ANSWER ANY OF YOUR QUESTIONS.
YOUR PURCHASE IS FOR A FULLY REFURBISHED, TESTED AND GUARANTEED, AMERICAN MADE, SORENSEN BRAND, MODEL DCR 20-115B, 0 - 20 VOLTS @ 0 - 115 AMPS, PRECISION, PLATING / BENCH / LAB, REGULATED, VARIABLE DC POWER SUPPLY (RECTIFIER) WITH ANLOG VOLT / AMP METERING, WORKING PERFECTLY AND COMPLETE WITH MATING "SUPERCON" HIGH-CURRENT PLUGS, ALL IN EXCELLENT CONDITION (SEE ALL OF THE PHOTOS FOR DETAILS, NOTE: UNIT MAY DIFFER SLIGHTLY FROM PHOTOS)
TO VIEW THE MANUAL FOR THIS SPECIFIC PRODUCT PLEASE CLICK ON THE FOLLOWING HYPERLINK:
IMPORTANT NOTE: NOTE: THIS PLATING RECTIFIER REQUIRES 187-233 VOLTS AC, 60 HZ, SINGLE PHASE POWER FOR OPERATION!
IMPORTANT INFORMATION: WE OPERATE A PROFESSIONAL FACILITY THAT EXPERTLY REBUILDS THESE DC LABORATORY ELECTRO PLATING POWER SUPPLIES TO MEET ORIGINAL FACTORY SPECIFICATIONS.
EACH POWER SUPPLY IS DISASSEMBLED, INSPECTED, TESTED, AND ANY REQUIRED ELECTRICAL OR MECHANICAL PARTS ARE REPAIRED OR REPLACED, THE ENTIRE UNIT IS CLEANED, AND IF NEEDED, PROFESSIONALLY RE-PAINTED!
AFTER CAREFUL RE-ASSEMBLY, EVERY POWER SUPPLY IS FULLY TESTED FOR ALL FUNCTIONS AT THE MAXIMUM RATED LOAD IN OUR FULLY EQUIPPED TEST LAB!
THIS FULLY REGULATED AND PRECISION POWER SUPPLY IS VASTLY SUPERIOR TO SIMPLE PLATING "RECTIFIERS" BECAUSE IT IS ACCURATELY CONTROLLABLE YIELDING VERY CONSISTENT RESULTS, AND IS THE IDEAL POWER SUPPLY FOR PLATING APPLICATIONS THAT REQUIRE VOLTAGES UP TO 20 VOLTS AND DRAW AS MUCH AS 115 AMPS.
THIS POWER SUPPLY PROVIDES A SINGLE, 0 - 20 VOLTS @ 0 - 115 AMPS OUTPUT WITH COARSE AND FINE CONTROL KNOBS FOR VOLTAGE AND CURRENT ADJUSTMENTS. THE DC SUPPLY PROVIDES, 0 - 20 VOLTS @ 0 - 115 AMPS, CONSTANT VOLTAGE AND / OR CONSTANT CURRENT (C/V, C/C).
IN ADDITION THIS POWER SUPPLY INCLUDES THE ADJUSTABLE OVER-VOLTAGE "CROWBAR" PROTECTION OPTION.
THE ANALOG METERS PROVIDE ACCURATE READINGS OF BOTH VOLTAGE AND CURRENT AND THE REAR PANEL OUTPUT CONNECTIONS ARE SUPERIOR ELECTRIC "SUPERCON" HIGH-CURRENT JACKS WITH SUPPLIED MATING PLUGS. ADDITIONAL CONNECTIONS ARE PROVIDED WITH REMOTE SENSE AND VOLTAGE programming / TRACKING CAPABILITIES.
THIS IS TRULY A LABORATORY GRADE, DC PLATING POWER SUPPLY WITH HUM AND NOISE SPECIFICATIONS MEASURED IN MILLIVOLTS AND SUPPLY REGULATION ACCURATE TO +/- .1%.
THE SORENSEN IS A PRECISION REGULATED DC LAB SUPPLY THAT CAN BE UTILIZED FOR ANY APPLICATION IN PLATING, AND ELECTRONIC CIRCUIT DESIGN OR REPAIR.
THIS UNIT CAN ALSO FUNCTION AS THE ULTIMATE BATTERY CHARGER PROVIDING COMPLETE CONTROL OF CHARGING CURRENT AND END OF CHARGE VOLTAGE! (IMPORTANT NOTE: A PROPERLY RATED "BLOCKING" DIODE MUST BE INSERTED IN SERIES WITH THE BATTERY BEING CHARGED TO PREVENT CATASTROPHIC DAMAGE TO THE POWER SUPPLY!)
SORENSEN MAKES THE FINEST LABORATORY DC POWER SUPPLIES IN THE WORLD AND THIS POWER SUPPLY PROVES IT!
TO VIEW THE POWER SUPPLY HANDBOOK PLEASE CLICK ON THE FOLLOWING HYPERLINK:
THIS UNIT HAS BEEN COMPLETELY TESTED IN OUR FULLY EQUIPPED LAB AND IS GUARANTEED TO BE WORKING AND MEETING ORIGINAL FACTORY SPECIFICATIONS.
I AM SELLING THIS ITEM FULLY GUARANTEED FOR $1,489.00 (THIS PRODUCT ORIGINALLY SOLD FOR MORE THAN $2,800.00! A.F.I.)
SORENSEN DCR 20-115B, 0-20V, 115A POWER SUPPLY C130-1172-43-W
All company and product registered trademarks are acknowledged and are the property of their respective companies
