Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Modern Stuff
> 8" impulse heat sealer w/warranty free kit
8" impulse heat sealer w/warranty free kit
PFS-200 Hand Operated Impulse Sealer
HEAVY DUTY PLASTIC BAG SEALER 8 inches
We test every machine before we send it to you.
FREE Kit!! 2-wire and 2-tefelon cloth INCLUDED!!
It is an Impulse Heat Sealer with precise electronic timer to control the sealing time.
It comes with the extra Teflon strip and sealing wire (NO CUTTER)
* Plug cord into AC outlet, no switch necessary; machine will operate only when arm is depressed.
* Regulate the timer according to thickness of material to be sealed; use a higher-number for thicker material.
* Put the material between the sealing bars.
* Pull down the sealer handle.
* Sealing takes place when light is on, leave down for additional seconds after light goes off for a better seal.
* Release the handle; you will see a consistently flat seal on the material.
1) Including: PFS100, PFS200, PFS300, PFS400
2) The seal width ranges from 2mm-5mm
3) Equipped with a plug-in electronic timer
4) The timer controls the sealing time needed for different material thickness
Call for tech support: (***)-477-1760
