Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Modern Stuff
> CNC
> New newall C80 2 axis digital readout / dro for milling
New newall C80 2 axis digital readout / dro for milling
The Newall C80 DRO is everything you could ask for in a digital readout and includes a full complement of productivity enhancing features. The innovative design allows the operator to easily configure the unit for either mill or lathe specific features. In addition, the C80 DRO includes a feed rate display that allows for longer tool life and increased cutting tool performance.
The complete system includes the following:
A operations manual, 2 axis display, 2 linear scales and mounting hardware.
The scale resolution is 5um/.0002" or 10um / 0.0005"
C802000/1 C80 Mill Package, 12"x24" Travel
C802000/2 C80 Mill Package, 12"x30" Travel
C802000/3 C80 Mill Package, 12"x36" Travel
C802000/4 C80 Mill Package, 16"x30" Travel
C802000/5 C80 Mill Package, 16"x36" Travel
C802000/6 C80 Mill Package, 16"x40" Travel
Based on the principle of electromagnetic, Newall's Spherosyn, Microsyn scales consist of a tube, constructed of stainless steel or carbon fiber weave, filled with a column of individually graded steel balls. The balls are set under a pre-load at the factory. The tube is then sealed. The Reader Head consists of six copper coil assemblies wound around a fiber composite bobbin. The coil assemblies and required electronic circuitry are potted with an epoxy resin. This completely seals the electronics from coolant, oil and other shop contaminants.
* Absolute/Incremental Operation
* Segmented Error Compensation
* Switchable Resolutions by Axis
IP67 Rating (fully submergible), completely sealed
Withstands dust, dirt, oil and other environmental conditions
No mechanical wear characteristics
No more broken or scratched glass
