Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Welding and Laser Cutting
> Simadre 50R 110/220V 50 amps dual voltag plasma cutter
Simadre 50R 110/220V 50 amps dual voltag plasma cutter
Brand New SIMADRE 50R DUAL VOLTAGE WELDER
SIMADRE PORTABLE 50 AMP PLAS MA CUTTER !!!
* Portable: This machine weights only 20 lbs and the box size is only 17 inches Length x 8 inches width x 16 inches height. This machine comes with torch and ground clamp and cable, air filter, regulator and some initial consumables.
* The newer semiconductor circuits with genuine Toshiba MOSFET component in this machine is designed quite well. Cooling system is using advanced Germany equipment. With reasonable care it should provide many years of trouble-free service.
* After all, this machine is powerful and well-equipped with same functions as other brands in the market!!!
Cycle 60% at 50 Amps and 100% at 30 Amps
5/8 inch clean cut with 7.5 inches per minutes; 0.8 inch clean cut with 5 inches per minutes and 1 inches severance cut with 2.5 inches per minute
50 Amps under both AC 110V and 220V
50 and 60 Hz with operating air pressure as 75 psi @ 5 cfm
Plasma Cutter - Inverter Unit, 10 Ft Ground Cable & Ground Clamp, Torch with Hose, Electrode, Nozzle, Ceramic Shield Cup and Swirl Ring, Air Filter/Regulator, Hose, Clamps, Mounting Bracket and Owner Manual
