Environmentally Conscious and Economically Sound Machine Dismantling Forum > Kenosha
> Welding and Laser Cutting
> TIG Welding of Steel
> New - vickers hydraulic vane pump p/n V20F4P8T
New - vickers hydraulic vane pump p/n V20F4P8T
New V20F4P8T Vickers Hydraulic Pump
* The following numbers are on the pump: V20F4P8T, 3A 6E 11, and HH 0 8C.
* There are two -16 fittings, one on each side.
* There is also one 1 pipe thread fitting.
* The shaft is 1 1/16 diameter and 2 long.
* There are three sections to the shaft:The bottom section is 1 1/16 diameter and is 1 long. The middle section is 15/16 diameter and is 1 long. The top section is threaded and is 7/8 and is long.
* The keyway is 3/16 x 3/16 x 1 .
* The mounting pilot around the shaft is 1 13/16 ID and 2 OD. There are two 3/8 holes and they are 4 apart. There are also six 3/8 threaded holes that have a 3 bolt hole circle.
* The overall dimensions are 9 x 5 x 4 .
