Environmentally Conscious and Economically Sound Machine Dismantling Forum > Madison, WI
> Modern Stuff
> Computer Controlled Machinery
> 10 boxes powers #50214 7/8" tophat pins - hilti, ramset
10 boxes powers #50214 7/8" tophat pins - hilti, ramset
10 Boxes - Powers #50214 7/8" tophat 0.300 drive pins (boxes of 100)
We have over 370 boxes in stock!!
These pins work in Hilti, Ramset, Remington, Jamerco, and most other single shot - powder actuated tools.
Tophat pins are used primarily for applications fastening drywall track to concrete or steel. Pins are assembled with a metal top hat to provide faster insertion into the driving tool with reduced possibility of pricking a finger during load and to provide extra bearing surface against the drywall track.
Drive pins with a 8mm head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel. These pins are formed with a 0.145 diameter shank in various lengths and a specially designed point to allow proper penetration into typical base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.
