Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Antiques
> Anvils
> General electric ge - 1/15HP motor #5KPM49EG276A
General electric ge - 1/15HP motor #5KPM49EG276A
ITEM: GENERAL ELECTRIC Model # 5KPM49EG276A
1/15 HP - 3400/2800 RPM - 115 V - 1.0 / 0.96 A - TIME RATING CONT. - CODE C - PHASE 1 - LHU - 60/50 HZ - ROT CCW / CW - CAP 6 MFD
*Above is all the Info I can Read on the Motor itself.
Shaft extends out from motor aprox 7/8" and is aprox 1/4 round, with a flat spot.
Physical Condition: Was NOT Tested - Appears to be in Good Shape. It's Fairly Clean, was not cleaned up for picture.
About My TESTING, CLEANING, DESCRIPTIONS & WORKING CONDITION on THE ITEMS.
Most My Items came from an Ex-Radio shop. Most of my Parts are Old Stock items. Most have Not been used, But There are some that been Used too. If I can tell it been used, It will be marked as Used. Majority of the Radio's, Turntables, CB's etc... Has been Used. Do Not know which items had work done to them or not. Some probably Do work, some probably don't.
I Am Not a Radio Collector and I Do Not Work of them. I Just happened to come up lots of stuff from an Old EX-shop. And know There's probably people who can use them. NOT ALL THE ITEMS ARE TESTED! Most are NOT tested. Items tested will say exactly what I tested & how. CAR RADIO's & PARTS - I Do NOT TEST AT ALL.
ALL My Descriptions - I try to give my best opinion of the item. By Listing any Physical Flaws I see and if I see anything missing. All my Items are Only Quickly Wiped Down, Just to get the surface dust off them. I Don't do much cleaning to them at all. Other than that, They are basically exactly how I got them. I Don't Dress them all up to look pretty just to sell them. Since I know I'm an amatuer when it comes to electronics. I don't tamper with anything or test anything that I don't know much about.
