Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Modern Stuff
> Computer Controlled Machinery
> Bell & gossett hsc-s QF8167 10X12X14 rotating pump elem
Bell & gossett hsc-s QF8167 10X12X14 rotating pump elem
Bell & Gossett HSC-S QF8167 10x12x14 Rotating Pump Element Brand New
SAVE Tens of Thousands of dollars!!!!!!
I think these are the full specs...
ELE REO ROTATING ELEMENT ONLY (MODEL 100 AND
INF VC B=0.031_C=1.5 Vane chip
INF R To hold the remainder in the diameter INF check.
PMP.M 940 Cast iron/bronze fitted pump
ROT CCW Counter-Clockwise (A),(G) / Left-Hand
OPER DIA 12.700 Inches, Impeller dia.
OPER RPM 1800 RPM, Rated speed
CSG.M STD Cast iron, 125# F.F. flanges, 175# W.
SEAL MSH Mechanical seal on shaft
MS 4S Crane type 21 BF(50)1O(10)1 Buna/Carb
SFT.M 346 416 SS shaft (high strength)
PAINT 152R Fire red paint std process
PERF.T NONE No Performance Test
SPCL.R NONE No Special Requirements
SZ EV 12x10x14 / 10x12x14 / 10x12-14
RTG.MS HSCA28-LARGE HSC PUMP END ONLY WITH
RTG.MS MECHANICAL SEAL OVER SHAFT TYPE SEAL
RTG.MS (& FLUSH TUBES IF REQ'D).
If you have more questions email me for my phone number....
