Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Modern Stuff
> Light Emitting Sources
> Jdsu/acterna/ttc fireberd 8000 datacom testpad package
Jdsu/acterna/ttc fireberd 8000 datacom testpad package
JDSU/Acterna/TTC Fireberd 8000 Datacom Testpad
w/CLK Clock Recovery, Runs WindowsXP FST-2000
Appears UNUSED, Case, Cables, Manual ...more
Take testing to the next level with a single platform for new and legacy requirements
The FIREBERD 8000 combines the success of two highly successful test platforms - the FIREBERD 6000A and the TestPad. As a datacom analysis module for the TestPad, the portable, battery-powered FIREBERD 8000 completes a winning combination in size, flexibility, and test capability.
* Easy-to-use graphical user interface (GUI) maximizes navigation ability and test efficiency.
* Native datacom interfaces for EIA-530, RS-449 (422 and 423), RS-232, X.21, V.35, and V.36 serial interfaces.
* Government standards support for MIL-188C and MIL-188-114.
* Field-friendly interface module slot supports conditioned diphase module and expandability to new technologies.
* Synchronous/asynchronous and DTE/DCE modes of operation.
* A full suite of BER patterns with data rate support up to 18 Mbps.
* Verify end-to-end connectivity - Isolate problems to a specific direction by analyzing the performance of an entire digital link in both directions.
* Timing analysis - Detect timing problems stemming from propagation delay or incorrectly timed network elements.
* DTE and DCE emulation - Test head-to-head with a variety of synchronous and asynchronous datacom network elements.
* Quality of Service (QoS) Testing - Standardize test metrics with a variety of results measurements, including Round Trip Delay, G.821, and Pattern Slips analysis.
* Internal, recovered, and external clock capability.
* Clock recovery option enables clock recovery from receive data lead.
* Virtual breakout box provides a visual representation of activity on data, clock, and signal leads.
* Remote operation and results storage.
* Normal, inverted, or auto clock edge selections.
* In-band and out-of-band flow control.
This package is in pristine condition. It is doubtful it was ever used
Contact via E-mail or call for more information.
IN THE RARE EVENT A SOLD ITEM CAN NOT BE CALIBRATED BEFORE DELIVERY: Before our items are put into inventory they are lightly examined in our lab for operational status. Some are then stored in the warehouse until sold at which point it is brought back into the lab for a complete testing and the issuing of the 'CAL/CERT'. Others already have a 'CAL/CERT' issued before being placed in the warehouse. Though rare it is possible for the item to be found during the 'CAL/CERT' process to have a defect not apparent in the initial operational examination. At this point the item is fully reconditioned with the defect corrected... HOWEVER there are times the item my not be repairable or the manufacturer no longer has a part needed to correct the problem, OR the part may take a day or 2 or a week to arrive. We stock most parts here but there are the times we need to order it and it could happen the part is unavailable. We have multiple units of most of these items and can find one that is completely operational or take a part from one to fix the other.
