Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Welding and Laser Cutting
> MIG Welding with MIG Wire
> Millermatic 135 & 175 spoolmate 100 spoolgun package
Millermatic 135 & 175 spoolmate 100 spoolgun package
Miller Spoolmate 100 Spoolgun Direct Plug-In 300371
This kit allows installation of the Miller Spoolmate 100 Spoolgun to Millermatic 135 and Millermatic 175 from Serial# LC175022 ( with the 2 pin square drive motor plugs)
Installation time is approx 20-25 minutes,. required drilling a hole in the inside case ( where the wire spool is so as to install a toggle switch for selection of spoolgun or regular operation. Hooking up 2 pins on the 4 pin trigger plug on the front case and unpluging the drive motor and hooking it into the toggle switch plugs .
This package will also work on Millermatic 200 , Millermatic 250 , Millermatic 150, Millermatic 185 and others with modifications .
There is no warranty expressed or implied as this application is not recommended by the manufacturer . The newer Millermatic 140 & 180 machines have a fold back circuit on the pc board for protection in case the gun gets shorted.
We have installed the Miller Spoolmate 100 on the above machines and have had no problems . .
