Environmentally Conscious and Economically Sound Machine Dismantling Forum > Milwaukee
> Welding and Laser Cutting
> Stick Welding
> New pelco video camera switcher VS5104 4 in x 1 out
New pelco video camera switcher VS5104 4 in x 1 out
Pelco VS5104 Sequential Desktop Switcher, Video, Without Alarms, 4 In X 1 Out, 120VAC
The VS5104 are low cost, desktop, sequential switchers designed to switch four or eight cameras manually or automatically to one or two monitors and to respond automatically to alarm inputs.
Features * 120 or 230 VAC Input
* 4 or 8 Inputs (Terminating or Looping)
* Alarm Inputs (VS5004/VS5008)
* For use with Color or B-W Cameras
* Capable of Operating on 12 VDC for Use in Mobile Applications
* Inputs :Terminating; 75-ohm internal termination
* Outputs Monitor : 75-ohm source terminated (amplified)
* Outputs Monitor 2 : Bridging (non-amplified) unterminated (VS5004 only. Requires field conversion.)
* Monitor X : Coaxitron transmitter (non-amplified) output (VS5008 only)
* Dwell : Adjustable from 1 70 seconds nominal
* Frequency Response : Flat within 1 dB to 10 MHz
* Maximum Signal Level : 2 Vp-p
* Crosstalk : Better than -40 dB at 5.5 MHz
* Input Voltage : 120 VAC, 50/60 Hz or 230 VAC, 50 Hz to dedicated wall transformer (as noted in model description)
* Power Requirements for Transformer :1.5 VA (0.125 amp) at 12 volts RMS 15%, 50/ 60 Hz from a dedicated isolated power source. (Wall transformer included.) Note: These units are also capable of operating on 12 VDC for use in mobile applications.
* Alarm In : 1 common and 1 wire per channel Normally open contact, 10V at 1 mA
* Alarm Out : Open collector, grounded emitter transistor (2N222)
* Chassis Construction : Steel, zinc plated
* Cover Construction : Steel, black polyester powder coat
* Panel Construction : Aluminum, black polyester powder coat, white silk screen
* Environment : 32 to 120 F (0 to 49 C)
* Dimensions : 1.77" H x 5.51" W x 8.81" D (4.50 x 14.00 x 22.38 cm)
* Unit Weight : 2.53 lb (1.15 kg)
